Way2call Hi-Phone Maestro

Technical Specifications (preliminary)

General

Operating system:

• Supports Windows XP, 2000, Server 2003, VISTA 32 bit and 64 bit, WIN7 32 bit and 64 bit, WIN Server 2008 R2

Host Interface:

• USB 2.0 (Full speed, High speed)

Telephone Line Interface:

• Trunk Type: 2-wire analog

Connectors:

• Four RJ11 for external (loop start) phone lines, One RJ11 for local phone support

Network interface:

• PSTN: Loop Start Analog

Peripheral Interfaces:

• One RJ12 jack for professional headset
• Two 3.5mm jack In/Out (PC style)

LEDs:

• Power, suspend, headset, handset, line1, line2, line3, line4

Power supply:

• 7.5V DC from external power adapter
• USB bus powered

Environment:

• Operating Temperature: 10 to 40 C
• Storage Temperature: 5 to 55 C
• 15% - 80% relative humidity, non-condensing

Hi-Phone Maestro Sample Setup Scenario

1. Make sure that an analog phone and analog ine are used.
2. (A) - (D) Line 1 - Line 4
3. (E) Business Phone System
4. (F) (Optional ) Connect with telephony headset
5. (G) Connect with PC via USB
6. (H) Power Adapter

*In some countries (e.g. U.K., Germany), and external adapter for the phone and line might be required. Please check whether your local telephony connection standards default to the U.S.

Features

• Supports TAPI 2.1
• Direct sound support
• Local Phone set:
• Handset on/off hook detection
• DTMF detection
• Hook flash detection
• Audio streaming
• DTMF generation
• Ring generation
• Visual message waiting generation
• Caller ID and Caller ID on call waiting (CIDCW) generation

Telephone Line:

• Line on/off hook
• DTMF detection
• Ring detection
• Distinctive ringing detection
• Loop current drop detection
• Hook flash generation
• Caller ID detection (FSK, DTMF)
• Caller ID on Call waiting (CIDCW) detection
• On hook audio in streaming (wiretapping)
• Parallel phone on/off hook detection (Phone which not attached to the device)
• Parallel phone DTMF detection (Phone which not attached to the device)

Headset:

• Plug in/out detection
• Thumb digital volume control

Audio:

• PCM 16 bit 8Khz
• Full Duplex
• Echo suppression
• Echo cancellation
• AGC
• Mixer of 3 audio sources (For conferencing)
• Separate channel volume control

Call progress detection:

• SIT (Special Information Tone detection)
• Dial tone, Ring back, busy, reorder, voice, connected, silence and fax.